Why is My Refrigerator Water Dispenser Not Working?

Is the water dispenser on your refrigerator not working? If so, you can try to repair the issue by yourself or call One-Call Cary Appliance Repair for refrigerator repair Cary, North Carolina.

There are a lot of reasons for the water dispenser in a kitchen refrigerator to stop working. Again, some reasons might sound a bit crazy. However, something as obvious as an off switch on the refrigerator has been the culprit before. Be sure to inspect the more obvious potential issues before moving forward with complicated refrigerator repair. Let’s begin to cover this appliance repair problem and see all of the solutions we can cite for a broken water dispenser on a refrigerator.

The reason for a water dispenser not working is typically an installation issue, a filter failure or frozen water tubes:

New Refrigerator Installation Problems

You just installed a new refrigerator with a water dispenser, but it is not working. The water dispenser has to be hooked up to the home’s water line. That might be the cause of the problem.

If the new refrigerator is replacing a prior refrigerator that didn’t feature a water dispenser or ice maker, there’s a possibility that you do not have a functioning water line running to this area. Most of the time a water line is usually run from underneath a home either in a crawl space or basement. You can buy this type of water line at nearly any home repair store and they’re very easy for even the average homeowner to install. Usually they have include a water shut-off valve, which is necessary so that if you need to move the refrigerator, you can shut off the water.

If there is a water line, is the valve turned on? The valve handle must be lined up with the hose. And, is water going through the pipe you have installed to connect the water line? Simple and common questions, but things that have to be accounted for.

If you had to remove the doors during installation it is possible the water dispenser isn’t plugged in. Review the manual to see the wire harness for that particular model of refrigerator. Be sure that it’s plugged into the refrigerator.

When the water line is hooked up, most of the time there is air in it. So, lifting and lowering the dispenser control to get the air out of it is needed.
Filter Problems

On some popular refrigerators, there are different filters. These filters could “expire”, clog or get frozen. All filters are dependent on the style and type of refrigerator. If your filter is clogged it might cause slow filling or no flowing at all. It is recommended that your filter is replaced every 6 months. Replacing filters can be hard sometimes. If you run into problems, go online and learn the proper method to replace a filter.

One idea is to fill up the filter with water prior to installing it. A lot of time the water filters take a long time to fill up, which could cause you to assume the water dispenser isn’t working right. You will want to read the directions if all else fails. To ensure it’s not air trapped in the water lines, depress the dispenser lever for around 5 minutes.

A frozen water tank could be the cause of the problem as well in some models. If the water tank freezes it will begin to leak onto the fresh food bins. Limited food inside of the fresh food bins can cause freezing to happen.

ADDITIONAL REFRIGERATOR RESOURCES

• Refrigerator Not Cooling
• Refrigerator Noisy
• Refrigerator Ice Maker Not Working
• How Does a Refrigerator Work?